Community Announcements

  • Flying at the Edge of Space and Beyond: The Challenges and Opportunities of Hypersonic Flight

    Flying at the Edge of Space and Beyond: The Challenges and Opportunities of Hypersonic Flight

    presented by

    Kevin G. Bowcutt Ph. D.

    Principal Senior Technical Fellow & Chief Scientist of Hypersonics, The Boeing Company

    Sponsored by the UCI Samueli School of Engineering Department of Mechanical and Aerospace Engineering Distinguished Speaker Series

    Wednesday, February 15th, 4:30 to 5:30 PM

    at the UCI CALIT2 Building

    Reception to follow

    Please RSVP at the provided link, and please respond by February 8th, 2023.

    Dr. Kevin G. Bowcutt is a Principal Senior Technical Fellow & Chief Scientist of Hypersonics for Boeing with 40 years of experience.  He is an AIAA Fellow, a Fellow of the Royal Aeronautical Society, and a member of the National Academy of Engineering.  In 2021 he was selected by Texas A&M to be a Fellow of the Hagler Institute of Advanced Studies.  He holds BS, MS and PhD degrees in aerospace engineering from the University of Maryland.  Dr. Bowcutt is an internationally recognized expert in hypersonic aerodynamics, propulsion

    integration, and vehicle design and optimization. Notable accomplishments include developing the viscous-optimized hypersonic waverider, flight testing scramjets by launching them from a light gas gun, technically supporting the NASA X-43A scramjet flight test program, originating and optimizing the design of the X-51A scramjet-powered demo vehicle, helping the Space Shuttle Columbia accident investigation by simulating wing aero-thermal-structural failure, leading Boeing’s contributions to the HIFiRE international hypersonic flight experiment program, and leading Boeing’s reusable hypersonic airplane design investigation.  In the spring semester of 2007 Dr. Bowcutt was a visiting professor at Princeton University’s Mechanical and Aerospace Engineering Department where he taught a course in hypersonic airplane design and taught the same course at Texas A&M University in the spring of 2022.  Dr. Bowcutt leads Boeing’s advanced design and technology development efforts for hypersonic missiles, airplanes and space-planes.