Dear colleagues,
Please see the message below from Souma Chowdhury about the ASME DAC call for papers. You may reach out to Souma directly with any questions (his contact info below in the signature).
Best,
Ashwin
Dear Colleagues,
We invite you to join us in Anaheim, California, USA, on August 17th – 20th, 2025, for the 51st Design Automation Conference (DAC) under the https://event.asme.org/IDETC-CIE. Click or tap if you trust this link." data-linkindex="0">2025 ASME IDETC. Please see the attached file for the Call for Papers.
The detailed description of tracks and topics can be found here: https://idetc.secure-platform.com/a/page/tracks_topics. Click or tap if you trust this link." data-linkindex="1">https://idetc.secure-platform.com/a/page/tracks_topics. The draft paper submission deadline is March 17, 2025.
Feel free to contact us if you have any questions, and we look forward to receiving your submissions!
Best Regards,
On behalf of the 2025 DAC Executive Committee (EC)
Souma Chowdhury, 2025 DAC Program Chair
…….
Best Regards,
Souma
.....
Souma Chowdhury, Ph.D.
Associate Professor
Mechanical and Aerospace Engineering
Computer Science and Engineering (Adjunct)
Co-Director, Center for Embodied Autonomy and Robotics (https://www.buffalo.edu/cear.html. Click or tap if you trust this link." data-linkindex="2">CEAR)
Co-Director, Engineering Science M.S. in Robotics program
Review Editor, Structural and Multidisciplinary Optimization journal
246 Bell Hall
University at Buffalo
Buffalo, NY 14260
Phone: (716) 645-3059
Email: soumacho@buffalo.edu
Lab Website: http://adams.eng.buffalo.edu/. Click or tap if you trust this link." data-linkindex="5">adams.eng.buffalo.edu
------------------------------
--------------------------------------------------------------
S. Ashwin Renganathan, Ph.D. | Assistant Professor
The Pennsylvania State University
Department of Aerospace Engineering
Institute of Computational and Data Sciences
University Park, PA 16802
Lab:
https://sites.psu.edu/csdl/E-mail:
ashwin.renganathan@psu.edu------------------------------