Volunteer Bio

Dr. Pramod Kumar Dash

VTU Faculty ID:

1NTAE0017563

Designation:

Professor and Head

Email:

hod.aero@amceducation.in

Mobile No:

+916362621490

DOJ:

26/06/2023

Educational Details:

B.E. : Aeronautical Engineering

M.E. : Space Engineering

Ph.D. : Space Engineering

Experience:

Professor and Mentor (2022-2023)

Sandeep University, Nasik, Maharashtra.

Professor and Head, (2018 – 2022)

Nitte Meenakshi Institute of Technology, Bangalore

Professor (2017-2018)

MLR Institute of Technology, Hyderabad

Professor, Dean (Academic) (2015 – 2017)

Institute of Aeronautical Engineering, Hyderabad

Principal and HOD (2013-2015)

Rajdhani Institute of Engineering and Technology, Trivandrum

Professor and Research Director

University of Petroleum and Energy Studies, Dehradun, (2012-2013)

Professor, Dean and HOD (2008-2012)

Hindustan University, Chennai

8.Asst. Professor, (1992-2008)

BIT Mesra, Ranchi

Area of Interest:

Space &Flight Dynamics, Aerospace Propulsion, Aerospace Material and Structures.

Sponsored Project:

· AR&DB sanctioned Project entitled “Elastobuckling Analysis of GFRP Materials”.

· AR&DB sanctioned Project entitled “Studies on fatigue of CFRC under adverse environmental conditions”.

· AICTE sanctioned project entitled “Creep studies of glass and carbon fibre composite”

· AR&DB sanctioned project entitled “Studies on effect of adverse environmental exposure on mechanical performance of GLARE”

· AR&DB project entitled “Studies on impact damage on C-GLARE FML under single and continuous impact loading”

· ARMREB project entitled “Studies on transition of flame to detonation using blockages for pulse detonation engine”.

Project Supervised: (PG and PhD)

Ø Progressive fatigue damage effect on residual flexural strength of CFRP composite – An experimental study.

Ø Progressive damage and durability studies of carbon fiber reinforced composite.

Ø Computational simulation of combustion instability in SRM.

Ø Computational Study of Kerosene –LOX in Liquid Propulsion Rocket Engine.

Ø Numerical analysis of coal pulverization in a FBD

Ø Performance studies of bio-diesel and ethanol blend on IC engine.

Ø Application of FEM for Solving Fluid Dynamics and Fluid Structure Interact ion Problems

Ø 3Parametric Studies of Airfoil Flutter with and without Control Surface

Ø Computational Studies on Performance of a Laser Propelled Air Vehicle (Vertical lift)

Ø Condition Monitoring of Aircrafts Operating in Different Environmental Conditions Using Spectrometric Oil Analysis

Ø Design of Scramjet Inlet and Flow path Visualization through CFD

Ø Analysis and Modification on Lycoming Engine Fitted on HPT-32 Aircraft

Ø Noise Problem in Military Aircraft – A Case Study

Ø Design Fabrication and System Integration of a Medium range Low Altitude Fixed Wing UAV (NAYAN)

Ø Assembly and Analysis of Heat –Shield GSLV – III

Ø Effect of Sweep on a Flat Plate Wing Plain Form

Ø Estimation of Combat Aircraft CG and management.

Ø Synthesis, mechanical and damping characteristics of aluminum-copper-alumina nano composites for aircraft structural applications

Ø Analysis of metalized particle combustion in submerged SRM and its performance.

Ø Analysis and experimental study on DDT process by turbulence generating obstacles in PDE

Ø Experimental studies on conversion of flame velocity to detonation

Ø Experimental analysis of hybrid rocket combustion

Ø Combustion analysis of hybrid rocket motor using flat plate combustion model

Ø Effect of swirling GOX injection on the regression rate of the hybrid fuel.

Ø Simulation of combustion of a droplet of H2O2 monopropellant.

Ø CFD modeling of supersonic combustion in a scramjet engine

Ø Flow optimization and heat transfer analysis of ramjet engine combustion chamber.

Ø Elasto buckling behaviour of GFRP laminated rectangular plate with central hole

Ø Numerical simulation of a droplet combustion of Hydrazine propellant

Ø Design and analysis of an afterburner in supersonic flight.

Ø Combustion Stability Studies on Hypersonic Flight of Scram Jet

Ø Fluid structure interaction in convergent divergent nozzle.

List of Publications in Peer reviewed Journals:

Ø Srikrishnan S, Saffi K and Dr P K Dash, Numerical and Experimental validation for cross-section in pulse detonation engine design, Jr. of Ceramic Processing Research, August 2023. (Online)

Ø P K Dash, Jhumki Nandy, and Shruti Giri, Characterization of Improved Wax-based Hybrid Propellant in Hybrid Rocket, Int. Jr. of Mech. Dynamics and Analysis, Vol 7, No 2, 2021, pp. 19

Ø P K Dash, G Ram Vishal Study of Regression Rate in Hybrid Rockets Using Vortex Injector Recent Advances in Mechanical Engineering, 75-83

Ø R G Vishal, MS Suhas, V Bhat, PK Dash, Micro and Macro Approach for Characterisation of 3D Woven Orthogonal Carbon Composite, Advances in Mechanical and Industrial Engineering, 243-250

Ø P K Dash, G Ram Vishal, Vinod L, Mahendra MA, Prashant Manvi, Characterization of Strength of Aluminum (Al 6063-T6) After Corrosion Journal of Experimental & Applied Mechanics 12 (3), 14

Ø P K Dash, Jhumki Nandi, Shruthi R Giri, Experimental Investigations of Mass Flow Rate on Regression Rate of Hybrid Rocket, Journal of Experimental & Applied Mechanics 12 (2), 21

Ø S. Srikrishnan, V. Jayakumar and P. K. Dash, Feasibility Study of DetonationWave Initiation by Multiple Structured Blockages in a Plain Tube, Advances in Structures, Systems and Materials, Lecture Notes on Multidisciplinary Industrial Engineering, https://doi.org/10.1007/978-981-15- 3254-2_2

Ø S K Samal, P K Dash, et al. “Basic Design to Build the Airship for Indoor Applications”, Indian Journal of Natural Science. Vol.10/Issue 60/ June/ 2020. ISSN:0976-0997.

Ø P K Dash, S K Samal, et al. “Gondola Design and Material Selection for Indoor Airship”, Indian Journal of Natural Science. Vol.10/Issue 60/ June/ 2020. ISSN:0976-0997.

Ø S. Srikrishnan1, P. K. Dash, and V. Jayakumar, Evaluation of critical blockage ratio and pulse length in a pulse detonation engine using CFD and MATLAB, MATEC Web of Conferences 172, 02006 (2018), https://doi.org/10.1051/matecconf/201817202006

Ø N K Mishra, Dr P K Dash, and N Yashwanth, Damage Monitoring of Single Lap Bonded Composite Using Acoustic Emission Technique, IOP Conf. Series: Materials Science and Engineering 455 (2018) 012026, doi:10.1088/1757-899X/455/1/012026

Ø Naresh, E. and P, Ravi Kumar. and Govardhan, D. and Samba Siva Rao, B. and Dash, P. K., Experimental Investigation on Friction Stir and Spot Welding of AA 6061 and Its Strength Measurements (April 30, 2018). International Journal of Mechanical and Production Engineering Research and Development, Vol. 8, Issue 2, Apr 2018, 1189-1200. Available at SSRN: https://ssrn.com/abstract=3275192 or http://dx.doi.org/10.2139/ssrn.3275192

Ø G, Sravanthi and P, Ravi Kumar. and Anitha, D and Dash, P. K., Experimental Determination of Buckling Strength of Stiffened Panels (April 30, 2018). International Journal of Mechanical and Production Engineering Research and Development, Vol. 8, Issue 2, Apr 2018, 1171-1180. Available at SSRN: https://ssrn.com/abstract=3275191 or http://dx.doi.org/10.2139/ssrn.3275191

Ø P. K. Dash, M. Mary Thraza and Babithakodavanla, “Modelling and Simulation of Effect of Component Stiffness on Dynamic Behaviour of Printed Circuit Board”, International Journal of Mechanical and Production Engineering Research and Development, Vol. 8, Issue 2, pp. 307- 314, Apr 2018,( ISSN (P): 2249-6890; ISSN (E): 2249-8001, Scopus Indexed) doi: 10.24247/ijmperdapr201834

Ø S. Devaraj , Ravi Kumar. P, D. Anitha and P. K. Dash, “Wing Structural analysis using different Fiber Reinforced Composites and Hybrid Composites”, International Journal of Applied Engineering Research and Development (IJAERD), Vol. 8, Issue 3, Jun 2018, pp.101-110, (ISSN(P): 2249-6890; ISSN(E): 2249-8001) , Scopus Indexed)

Ø CH. Ragha Leena, Ravi Kumar. P, Anitha.D and P. K Dash, “Experimental Investigation Of Mechanical Characterization Of Pancarbon”, International Journal of Applied Engineering Research and Development (IJAERD), Vol. 8, Issue 3, Jun 2018, pp. 235-246 (ISSN (P): 2249- 6890; ISSN (E): 2249-8001) ), Scopus Indexed)

Ø T. Mahesh Kumar, Ravi Kumar. P, K. V. Muarali Krishna and P. K. Dash, “ Design and analysis of cavitating propeller”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 8, Issue 3, Jun 2018, 351-364 (ISSN (P): 2249- 6890; ISSN (E): 2249-8001 Scopus Indexed)

Ø M. Marythraza, D. Anitha , P.K. Dash and P.Ravi Kumar, “Vibration Analysis of Honeycomb Sandwich Panel in Spacecraft Structure”, International Journal of Mechanical and Production Engineering Research and Development , Vol. 8, Issue 3, June 2018, pp. 849-860 (ISSN (P): 2249-6890; ISSN (E): 2249-8001, Scopus Indexed )

Ø P K Dash and A Dash, “An Experimental Study on Impact of Cyclic Damage on Residual Flexure Strength of Plain Weave Carbon/Epoxy Composite”, International Journal of Composite Materials, Vol.8, No. 1, March 2018. doi: 10.5923/j.cmaterials.20180801.01

Ø Babitha Kodavanla, Mary Thraza and P. K. Dash, “Trajectory Planning and Collision Avoidance of Satellites in Formation Flight”, IJETSR, Vol. 4, No. 12, Dec. 2017, pp. 751- 755

Ø B. Kodavanla, Dr. P K Dash and Dr. D Govardhan, “Computational Aerodynamic Design Analysis over Single and Double Wedged Ramp”, Special Issue Published in International Journal of Trend in Research and Development (IJTRD), ISSN: 2394-9333, 2017, pp. 459-464

Ø P K Dash and Ankita Dash, “Cyclic Load and Residual Flexure Strength of Plain Weave Carbon/Epoxy Composite - An Experimental Verification”, INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH, Vol. 7, Issue 3, March 2018, pp. 190-194.

Ø P K Dash and M Mary Thraza, “Studies on Regression rate of Hybrid Rocket Motor Fuel in Lab Scale Rocket Motor”, JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT, Vol. 12, No.5, 2016, pp.345-357

Ø P K Dash and K Babitha, “Transonic flow analysis and Wing design of NACA 6 Digit Aerofoil Using CFD”, International Journal for Numerical Methods in Fluids, Vol 16, 2017, pp. 225-234

Ø P K Dash and Ram Vishal, “A study on the buckling strength of two side simple supported and two side s free rectangular glass fibre laminated composite plate”, Int. Journal of Civil Engineering and Technology, Vol 19, 2018, pp. 365-377

Ø P K Dash and Ankita Dash, “Effect of particle content on mechanical behavior of aluminum-based metal matrix composite (AMMC), Composite Science and Technology, Vol.35, No.4, 2018, pp. 267-277.

Ø P K Dash, “Position Identification of Spacecraft for precision flying using orbital parameters”, International journal of Aerospace Engineering, Vol 14, No. 2, 2019, pp. 76-86.

Ø P K Dash, “Analysis of trajectory planning for collision avoidance in formation flying”, Journal of Space Engineering, Vol.6, No.3, 2013, pp.298-312

Ø Balaji, R. and Dr. P. K. Dash, “Subsonic aircraft wing performance at transonic speeds and at different turbulent intensity levels”, International Journal of Current Research, Vol. 8, Issue, 11, November, 2016, pp.42652-42659

Ø Srikrishnan, S. and P K Dash, “2d cfd analysis of deflagration to Detonation transition in closed pipe Using different blockage”, International Journal of Mechanical Engineering and Technology (IJMET), Volume 8, Issue 6, June 2017, pp. 447–454.

Ø Balaji, R. and P K., Dash, ‘Trainer aircraft wing aerodynamic analysis considering Turbulence at Operational Speed”, International Journal of Current Research, Vol. 8, Issue 7, July 2016, pp. 34959-34967

Ø S. Rajasekhar, P K Dash, K. V. Mani Kumar, “Computational Prediction of Role of Vortex Generator in Combustion Enhancement”, Int. Jr. and Magazine of Eng. Tech., Management and Research, Vol. 3, Issue 10, 2016, pp. 690-695

Ø Balaji, R. and P. K. Dash, “Subsonic Aircraft Wing Performance at Transonic Speeds and at Different Turbulent Intensity Levels”, Int. Jr. of Current Res., Vol. 8, Issue, 11, November, 2016, pp.42652-42659

Ø P K Dash, Prof. B. S. Murty, and R B Karthik Aamanchi, Synthesis and mechanical property study of aluminum-copper-alumina nano composites & nc powder embedded glass/epoxy laminates, American Journal of Nanomaterials, Vol. 3, No. 1, 2015, pp. 28- 39, doi: 10.12691/ajn-3-1-4.

Ø S. Srikrishnan, Dr. P K Dash, Dr. S Nandaraja Pillai, and S. Arunvinthan, “An approach for space debris cleaning using space-based Robots”, Int. Jr. of Eng. Res. And Mang. (IJERM), Vo. 2, Issue 6, June, 2015, pp. 51-54

Ø S. Samal and Dr P K Dash, Reduction of Wingtip Vortices by Using Active Means, Int. Jr. of Sci. & Eng. Res., Volume 4, Issue 4, April 2013, pp. 1280-1287

Ø S. Samal and Dr P K Dash, Reduction of Wingtip Vortex from Suction at Wingtip, Jr of Mechanical Engineering Research, Vol. 3, No. 1; 2013, pp. 152-162

Ø P K Dash, and Dr. B K Das, “Test and Evaluation of Flight Vehicles using IR Imaging Techniques”, Int. Jr. of Enhanced Research on Sci. Tech. and Eng. (IJERSTE), Vol. 2, Issue 5, May, 2013, pp.75-80

Ø R. Santhanakrishnan, P. K. Dash, A. Joseph Stanley and M. Sabarish, Flexural property evaluation of gfrp-foam sandwich composite - an experimental approach, ARPN Journal of Engineering and Applied Sciences VOL. 7, NO. 10, OCTOBER 2012 pp. 1300-1306

Ø Dalbir Singh, and P.K. Dash, Dr., Role of Damage Parameters in Remaining Life Assessment of Composites in Aircraft Structures, Procedia Engineering, Volume 38, 2012, Pages 2702–2712

Ø P.K. Dash, R. Sathishbabu and C. Ganesan, Effect of Corrosive Environment on Elasto- buckling Strength of GFRC Plate, Asian Journal of Materials Science, Vol. 3, Issue-1, 2011, pp. 5-19

Ø P. Manivannan, P.K. Dash and B.T.N. Sridhar, An Experimental Study on Comparison of Non-circular Co-flow Jet with Co-Axial Jets and Computational Verification, Space Research Journal, Vol. 4, May 2011, pp. 60-70

Ø P.K. Dash and Y. Balto, Generation of Nano-copper Particles through Wire Explosion Method and Its Characterization, Research Journal of Nanoscience and Nanotechnology, Vol. 1, Issue-1, 2011, pp.25-33

Ø P. K. Dash and D. Singh, Shear Characterization of Woven Carbon/Epoxy Composite Under Various Adverse Environments, Int. Jr. of Strain, Vol. 47, Issue 5, October 2011, pp 458– 468

Ø Ganesan.C, and P.K.Dash, Elasto-Buckling Behavior Of GFRP Laminated Plate With Central Holes, International Journal of Mechanical & Industrial Engineering, Vol. 1, Issue- 1, 2011, pp. 73-76

Ø Yash Pal, Kalpit.K, and P.K.Dash, Regression Rate Study of PVC/HTPB Hybrid Rocket Fuels, International Journal of Mechanical & Industrial Engineering, Vol. 1, Issue -1, 2011, pp. 64-67

Ø P.K.Dash and A.K. Chatterjee, Effect of Environment on fracture Toughness of woven carbon/epoxy composite, Jr. of Inst. of Eng.(India), Vol. 85, 2004, pp. 1-9

Ø P.K. Dash, Kumar Satish and A.K. Chatterjee, A complete characterization of woven carbon fibre reinforced composite for aerospace application, Jr. of Inst. of Eng.(India), Vol. 83, 2004, pp.1-7

Ø P.K. Dash and A.K. Chatterjee, Effect of notch and environment on tensile strength of bi- directional carbon/epoxy composite – an experimental study, Jr. of Inst. of Eng.(India), Vol. 82, 2001,pp. 19 -25

Ø P K Dash, A Parashar and B K Singh, An experimental study of residual compressive strength after fatigue damage on glass/epoxy composite, Jr.of Inst. of Eng.(India), Vol. 82, 2001, pp 70-76

Ø P K Dash, H K Mohanty and A K Chatterjee, Effect of Environment on Flexural Strength of Carbon Epoxy Composite - an Experimental Approach, Jr. of The Institution of Engineers (India), Vol.80, Oct 1999, pp. 25-30

Ø P K Dash and A K Shrivastava Effect of environments on fatigue strength and fatigue life of bi-directional present carbon fibre reinforced composite Jr. of Aeronautical Society of India, Vol. 51 No. 2 May 1999, pp.83-92

Ø P K Dash and K Satish, “Effect of Fatigue Damage on Residual Flexure Strength of Plain Weave Carbon/ Epoxy Composite”, International Journal of Research Innovation in Engineering and Technology, Vol. 1, No.2, 2014, pp. 14-20.

Ø S. Srikrishnan, Dr. T. Shaafi, Dr. P. K. Dash, Onset of Detonation through a Cold Flow Analysis using Metallic Diaphragms – An Experimental Approach, ICDAMS 2020

Conference Publications

1. Effect of liquid rocket propellants on structural stability of composite materials, Proc. Of 36th ISTAM Congress, IIT Bombay, 1991

2. Application of advanced composite in space vehicles, Proc. of National Conv. on Indian Space Program, BIT Mesra, Ranchi, 1998.

3. A complete Mechanical Properties characterization of woven carbon fibre reinforced composite, Proc. of 15th National Conv. of Aerospace Engineers, IE (I), Ranchi, 2000.

4. An experimental investigation of transonic flow over aft Section protuberance, Proc. of 15th National Conv. of Aerospace Engineers, IE(I), Ranchi, 2000.

5. An investigation of in-plane shears properties of bi-directional woven carbon/epoxy composite under adverse environment, Proc. of 17th National Conv. of Aerospace Engineers, BIT Mesra, Ranchi, 2003.

6. Effect of corrosive environment on elasto-buckling strength of GFRC plate, Proc. of 17th National Conv. of Aerospace Engineers, BIT Mesra, Ranchi, 2003.

7. Computational simulation of combustion instability in SRM by vortex shedding method, Proc. Of Fluid Mechanics & Fluid Power, BIT Mesra, Ranchi, 2005.

8. AET application and damage characterization of glass fibre reinforce composite bonded joint, Presented at 23rd National Conv. of Aerospace Engineers 2008.

9. Effect of Environment on Failure of Composite Materials, Int. Conf. on Application of Composite, Hindustan University, Chennai, March 2009.

10. Behavior of SiC particles on metal matrix composite and strength determination, Int. Sem. On Smart/Advance materials, Thygaraj University, Madurai, 2010

11. Remaining assessment of composites with damage, ICIWSE – 2010, Int. Conf. on Innovative World of Structural Engineering, Dec. 25-27, 2010, Aurangabad, India, 2010

12. Crack initiation and its effect on life assessment of composites, 24th National Convention of aerospace Engineers and National Seminar on ‘New Vistas in Aviation and Aerospace’ Nov. 13-14, 2010, IE(India), Rajasthan State Center, Jaipur, 2010

13. Study of composites with damage for remaining life assessment, SEC 2010, The Seventh Structural Engineering Convention, 08-10, Dec., 2010, Dept. of Civil and Structural Engg., Annamalai University, Trichi, Tamilnadu, 2010

14. A computational calculation of spacecraft orbit transition at low thrust, 24th National Convention of aerospace Engineers and National Seminar on ‘New Vistas in Aviation and Aerospace’ Nov. 13-14, 2010, IE(India), Rajasthan State Center, Jaipur 2010

15. Studies on effect of weld and HAZ on strength of aluminum structure, 24th National Convention of aerospace Engineers and National Seminar on ‘New Vistas in Aviation and Aerospace’ Nov. 13-14, 2010, IE(India), Rajasthan State Center, Jaipur 2010

16. Position Identification of Spacecraft for Precision Flying in Orbital Parameters – 24th National Convention of aerospace Engineers and National Seminar on ‘New Vistas in Aviation and Aerospace’ Nov. 13-14, 2010, IE(India), Rajasthan State Center, Jaipur, 2010

17. Analysis of Trajectory Planning for Collision Avoidance in Formation Flying, 24th National Convention of aerospace Engineers and National Seminar on ‘New Vistas in Aviation andAerospace’ Nov. 13-14, 2010, IE(India), Rajasthan State Center, Jaipur, 2010

18. Studies on crack configuration and initiation in composites for remaining life assessment, IEEE and AIAA Aerospace Conference, March 5-12, 2011, Big Sky, Montana, USA

19. Estimation of precision formation flying using position of the spacecraft, Aerospace Conference, 2012 IEEE, DOI: 101109/AERO.2012.6187072, Publication Year: 2012, Page(s):1- 11

20. Flexure Study of Stitched and Nonstitched Sandwich Composite, National Conference on Composite, Loyala College, Chennai, 2012

21. Computational simulation of combustion instability of SRM by hot gas flow, International Conf. on Fluid Mechanics, UPES Dehradun, 2012

22. Effect of Fatigue Damage on Residual Flexure Strength of Plain Weave Carbon/ Epoxy Composite, Int. Conference on NDT, ISNDT, New Delhi, 2013.

23. Effect Ramp Cavity on Scram Jet combustion, Proc. of Fluid Mechanics & Fluid Power, 2013, NIT Hamirpur, HP.

24. 2d cfd analysis on deflagration to detonation transition in opened pipe using blockage, The Institution of Engineers (India), Kolkata sponsored All India Seminar on “Vehicle Aerodynamics Design” organised by IE (I) Hosur Local Centre, Hosur during 14th & 15th March 2017

25. Transonic flow analysis over naca 6 digit aerofoil using cfd, The Institution of Engineers (India), Kolkata sponsored All India Seminar on “Vehicle Aerodynamics Design” organised by IE (I) Hosur Local Centre, Hosur during 14th & 15th March 2017

26. Studies on missile detection method and auto destroy with enemy detecting and alerting robot, The Institution of Engineers (India), Kolkata sponsored All India Seminar on “VehicleAerodynamics Design” organised by IE (I) Hosur Local Centre, Hosur during 14th & 15th March 2017

27. 2D CFD Analysis of Deflagration to Detonation Transition in Closed Pipe using Different Blockage, 30th IEI National Convention of Aerospace Engineers and National Seminar on ‘Aerospace Technology: Future Trends and Developments’ held at Adhiyamaan College of Engineering (Autonomous), Hosur, Tamil Nadu, November 25-26, 2017.

28. Analysis of NACA-4 Digit Aircraft wing using 3D CFD, 30th IEI National Convention of Aerospace Engineers and National Seminar on ‘Aerospace Technology: Future Trends and Developments’ held at Adhiyamaan College of Engineering (Autonomous), Hosur, Tamil Nadu, November 25-26, 2017.

29. Asteroid Redirect Mission, 30th IEI National Convention of Aerospace Engineers and National Seminar on ‘Aerospace Technology: Future Trends and Developments’ held at Adhiyamaan College of Engineering (Autonomous), Hosur, Tamil Nadu, November 25-26, 2017.

30. OPTIMIZATION OF DYNAMIC STUDY OF AIRFOILS AT TRANSONIC SPEEDS; International Conference on Electrical, Electronics, Computers, Communication, Mechanical and Computing (EECCMC) 28^th & 29^th January 2018 Priyadarshini Engineering College, Chettiyappanur, Vaniyambadi - 635751, Vellore District, Tamil Nadu, India.

31. COMPUTATIONAL AERODYNAMIC ANALYSIS OVER SINGLE AND DOUBLE WEDGED RAMP; 2nd International Conference on Advancement in Engineering, Applied Science and Management, (ICAEASM-2018), 28 January 2018, Organized by Conference Info Venue: (OUCIP, Hyderabad) Osmania University Centre for International Programs, Osmania University Campus, Hyderabad – 500 007, Telangana State, India

32. Evaluation of Critical Blockage Ratio and Pulse Length in a Pulse Detonation Engine using CFD and MATLAB; 3^rd International Conference on Design, Analysis, Manufacturing & Simulation (ICDAMS 2018), organized by Departments of Mechanical & Automobile Engineering, Saveetha School of Engineering, Saveetha University, Chennai – 602 105, Tamilnadu, INDIA in association with The Institution of Engineering and Technology (IET) on 6-7 April 2018.

33. S. Srikrishnan, Dr. T. Shaafi, Dr. P. K. Dash, Onset of Detonation through a Cold Flow Analysis using Metallic Diaphragms – An Experimental Approach, ICDAMS 2020

International Planetary and

Keynote Address:

Ø ‘Materials for Aerospace – Past, present and future’, 4^th International Conference and Expo on Aerospace and Aeronautical Engineering, Oct. 25-27, 2021, Valencia, Spain.

Ø ‘Space Technology potential and future trends’, Aerospace & Defense Technology Trends(MUST), 2021, Munich, Germany.

Ø ‘AI and Its Application in Future Aerospace’, International Conference on Mechanical and Aerospace Engineering (ICMATAE 2021), 17-19, Dec. 2021, Shanghai, China.

Ø ‘Development of Anti-Drone Technology and Its Requirements’, 2022 International Conference on Aerospace, Aerodynamics and Mechatronics Engineering (AAME 2022), July 29, 2022, Singapore

Ø ‘Roll of Catalyst on Space Propulsion System’, 14th edition of global conference on catalysis, chemical engineering and technology, march 13-14, 2023, Singapore

Books published:

1.Space Technology – 2003

2.Air Cargo Operation

Patent:

1. An Intelligent Agricultural System for Progressive Farming – G 202022101022 (Germany).

2. Intelligent Plug-in Hybrid Electric Vehicle – 2021106812 (Australia)

3. Electric Vehicle Manufacturing Process: Intelligent Electric Vehicle Manufacturing Process and method to Improve the Production – 202111037455 (Govt. of India)

4. Intelligent Plug and Play Point to Multipoint Internet of Things (IoT) Platform and Managing the Same – 202141040844 (Govt. of India)

5. Automatic Irrigation and Fertigation Using ML and Mobile Based Application – 202241021997 (Govt. of India)

OTHER INFORMATION:

Membership of Professional Society:

1.Senior Member: AIAA, USA

2.Member: ASME, USA

3.Member: ERPS, USA

4.Member ISEBE, Australia

5. Member: The Aero. Soc. Of India, New Delhi, India

6. Fellow: The Institution of Engineers (India), Calcutta, India

7. Member: Indian Soc. Of Technical Education, New Delhi.

8. Member: The Ultrasonic Society of India, New Delhi.

9. Member: Indian National Science Congress, Calcutta.

10. Member: Fluid Mechanics and Fluid Power, Mumbai.

11.Member: Indian Soc. for Comp. Mat., Hyderabad

12.PTC Member for Ship Structure Committee, USA

13.Reviewer and Technical editor for 12 International Journals

14.Member: Asian Council of Science Editor, Dubai, UAE

Awards and Consultancy

The Aerospace Division Awards: - “The Institution of Engineers, Calcutta”, 2003.

Reviewers:

105 International Journal Papers, 42 International Conference Papers

Worked as Technical Editor for 7 Journals.

Consultancy:

1.PTC Member for Ship Structure Committee, USA

2.IndLab (India), (Rs. 100000.00) (Design of Supersonic Wind tunnel)

3.Royal Nag Aviation (India) (Rs. 100000.00) (Development of system for Thrust Calculation)

4.Ph. D. Completed – 5, Ongoing: 6, Reviewed: 2

International Committee Member:

Involve with seven different committee of AIAA (USA)

Involve with 3 Aerospace Committee of ASME (USA) Involve with SAE

Aerospace Committee (India)

Judge for Student activities conducted by AIAA Region 8 (USA)

Invited Member of Academy of Science (China)

Academic Member:

BOS member of 10 different University and Autonomous college.

Advisor Member for IFERP

Worked as Senet member for Kerala University, Trivandrum.

Volunteer Profile

Dr Pramod Dash

Contact Details

Dr Pramod Dash

Volunteer Bio

International Planetary and

Keynote Address:

Membership of Professional Society: